Simulated workplace
Controlled documents
Document library
Controlled policies, procedures, forms, templates, registers and plans. Forms and templates can be completed on screen and printed.
| Code | Document | Type | Owner | Version | Next review |
|---|---|---|---|---|---|
| NEX-POL-001 | Work Health and Safety Policy States the commitment of Nexus to the health and safety of its workers, contractors and visitors and the framework for m | Policy | General Manager | 3.0 | 12 February 2027 |
| NEX-POL-002 | Quality Policy and Non-Conformance Management Sets out how Nexus ensures every body, trailer and component meets the drawing, the customer specification and the appli | Policy | Quality and Compliance Manager | 2.3 | 4 March 2027 |
| NEX-POL-003 | Heavy Vehicle Standards and Compliance Policy Defines how Nexus ensures every vehicle it completes or modifies complies with the Australian Design Rules, the Heavy Ve | Policy | Quality and Compliance Manager | 2.0 | 22 May 2027 |
| NEX-POL-004 | Hazardous Chemicals and Environmental Policy Sets the rules for purchasing, storing, using and disposing of hazardous chemicals, and for controlling emissions and wa | Policy | Production Planning and Support Manager | 1.5 | 8 October 2026 |
| NEX-PRO-010 | Welding and Hot Work Procedure Describes the mandatory steps for setting up, performing and finishing welding, thermal cutting, heating and gouging saf | Procedure | Fabrication Manager | 3.1 | 19 March 2027 |
| NEX-PRO-011 | Hydraulic and Pneumatic Kit Assembly and Test Procedure Sets out how hydraulic tipping kits and pneumatic brake and air kits are assembled, installed, tested and recorded befor | Procedure | Assembly Supervisor | 2.2 | 30 April 2027 |
| NEX-PRO-012 | Paint Shop Operations and Isocyanate Safety Procedure Describes how surfaces are prepared, primed, painted, finished and reworked in the Nexus paint shops and how workers are | Procedure | Paint Shop Supervisor | 2.4 | 15 January 2027 |
| NEX-PRO-013 | Final Inspection and Pre-delivery Procedure Sets out the checks, tests and documentation required before a completed vehicle is plated, released and handed to the c | Procedure | Quality and Compliance Manager | 3.0 | 22 May 2027 |
| NEX-FRM-020 | Incident and Hazard Report Form Used by any worker to report an injury, near miss, hazard, chemical exposure or property damage so it can be recorded in | Form | Safety and Training Coordinator | 2.0 | 12 February 2027 |
| NEX-FRM-021 | Job Safety Analysis Form Completed by the work crew before a non-routine or high risk task to break the task into steps, identify the hazards at | Form | Safety and Training Coordinator | 1.6 | 3 June 2027 |
| NEX-TPL-030 | Toolbox Talk Record Template Used by supervisors and leading hands to plan, deliver and record the weekly toolbox talk with their crew. | Template | Safety and Training Coordinator | 1.3 | 20 April 2027 |
| NEX-TPL-031 | Continuous Improvement Proposal Template Used by any worker or team to propose an improvement to safety, quality, cost, delivery or workplace layout and to recor | Template | Production Planning and Support Manager | 2.0 | 10 July 2027 |
| NEX-REG-040 | Plant and Equipment Register Lists the plant, lifting equipment, welding machines, booths, hoists and measuring equipment at each site with their ins | Register | Production Planning and Support Manager | 4.2 | 12 February 2027 |
| NEX-PLN-050 | Emergency Response Plan Sets out how Nexus prepares for and responds to fire, chemical release, serious injury, structural collapse and other em | Plan | Safety and Training Coordinator | 2.1 | 25 August 2027 |